Roller Barrier - Brackets
Home About
Insight
FAQs & Advice
Product Finder
Solution Finder How
to Order Contact
us News
& OffersThe standard Roller Barrier bracket range at a glance (CLICK ON IMAGES FOR FULL DETAILS OF EACH BRACKET)
 |
 |
 |
 |
 |
 |
||
|
Universal Fixing Bracket |
Fence Top / Facia Board Bracket |
Facia Board Bracket (extended model) |
Small Cranked |
Straight Twist |
Alleyway |
||
spec.sheet (30kb)
|
spec.sheet (77kb)
|
spec.sheet (77kb)
|
spec.sheet (75kb)
|
spec.sheet (59kb)
|
see below for larger image |
please note: if our standard brackets (as above) will not suit
your application, bespoke brackets can be produced to order
click here for details of our
"FastFix" self tapping masonry bolts
|
|
|
||
The Roller Barrier Cups form the heart of this effective yet non aggressive anti climb system and are available from stock in black (standard cups), or green (RAL6005). Manufactured from a special UV balanced, weatherproof and flame retardant recycled polycarbonate, the cups simply thread on to a central spindle which is supported at approximately 2 metre intervals by suitable brackets. The Roller Barrier system can be used above walls, fences, or gates, as well as across alleyways, ...and a range of brackets are available, providing a suitable solution for every location. |
|
 |
||
|
|
|
||
Product Ref: PS RBRKTSU The Universal Fixing bracket is the popular standard choice for most applications. This versatile bracket can be "top" or "face" fixed making it the ideal choice for use on brick / masonry walls, box section fence tops, etc. |
|
Features: Manufactured from 6mm steel plate Galvanised finish
as standard O/A Height: 130mm O/A Length: 180mm 2 x 10mm fixing holes
|
||
|
|
return to top of page | ||
Product Ref: PS RBRKTFS The Fence Top / Facia Board Fixing bracket. |
|
Features: Manufactured from
6 x 40mm Galvanised finish
as standard O/A Length: 120mm 2 x 10mm fixing holes |
||
|
|
return to top of page | ||
Product Ref: PS RBRKTFE The Facia Board (Extended) Fixing bracket. |
|
Features: Manufactured from
6 x 40mm Galvanised finish
as standard O/A Length: 275mm 2 x 10mm fixing holes |
||
|
|
return to top of page | ||
Product Ref: PS RBRKTSC The Standard Cranked Fixing bracket. |
|
Features: Manufactured from
6 x 40mm Galvanised finish
as standard O/A Length: 500mm clearance of the roller cup 3 x 10mm fixing holes |
||
|
|
return to top of page | ||
Product Ref: PS RBRKTST The Straight Twist Fixing bracket is ideal for fixing to the face or rear of fence posts (straight bracket without twist also available for fixings to side of fence posts, etc.) |
|
Features: Manufactured from
6 x 40mm Galvanised finish
as standard O/A Length: 530mm 2 x 10mm fixing holes |
||
|
|
return to top of page | ||
Product Ref: PS RBRKTAB The Alleyway Fixing bracket.
|
|
Features: Manufactured from
50mm Galvanised finish
as standard 2 x 10mm fixing holes / slots Spindle retaining bolt |
||
|
|
return to top of page | ||
prod ref: TM FXMM6/50 M6 x 50mm (pack of 50) prod ref: TM FXMM8/50 M8 x 50mm (pack of 50) prod ref: TM FXMM10/60 M10 x 60mm (pack of 50)
|
click on image to enlarge |
hardened steel, self tapping |
||
|
|
return to top of page |
|
||||||||||||||||
|
