|
Pigeon Spikes & Seagull Spikes offer you an effective and humane way to deter
birds from
nesting or congregating on your buildings, without harming them...
Pigeons can be a serious nuisance when they congregate in numbers in one place and their droppings are not only unsightly, but can also
rapidly become a health hazard.
Periodic culls organised by your local council may help to reduce overall
pigeon numbers, but installing Bird Spikes (pigeon deterrent spikes or
seagull spikes) on and around your premises will provide
you with a more immediate solution to your specific problems!
Bird Ban seagull and Pigeon spikes are used extensively by councils, businesses and domestic users throughout the UK,
...and at the special low prices offered by Insight Security, everyone can afford to use
these anti roosting spikes to solve their bird / pigeon problems
Insights' range of bird deterrent spikes include feral Pigeon Spikes and Seagull Spikes as well as the usual accessories such as gutter clips, window clips and adhesives, which are suitable for use with either type of spike.
You can stop the mess and health hazard posed when birds congregate in a location, simply and cost effectively with this range of practical bird deterrent spikes.
Manufactured from weatherproof, UV stabilised polycarbonate (or polycarbonate and stainless steel), the spikes can be fixed in place with screws,
cable ties, or special adhesive.
Materials;
Defender Pigeon Spikes are manufactured from robust, UV stabilised, weatherproof polycarbonate
material.
To combat the razor sharp beaks of the more aggressive seagull,
the spikes on the Seagull Spike product are manufactured from stainless
steel.
Product Size and coverage;
Each strip measures 335 mm in length, with the height of the
spikes being 112mm (pigeon spikes) and 150mm (gull spikes)
A single row of pigeon spikes will protect a ledge or windowsill up to
200mm (8") wide, while the larger Gull Spikes will protect a ledge or
windowsill up to 280mm (11") wide
For wider window sills, ledges, parapets, etc. bird ban spike strips can be installed side by side.
(Note: although pigeon spikes are cheaper than gull spikes, where a ledge
is wider than can be covered by a single row of pigeon spikes, if one row
of gull spikes will cover it, it will work out cheaper.
When strips are installed side by side, the maximum recommended gap between
the rows measured at the top of the spikes is 50mm for pigeon spikes and
100mm for gull spikes.
The 335 mm strips are typically installed end to end and being manufactured from polycarbonate can be easily cut with a hacksaw where a
shorter length is required (i.e. for installation onto a small CCTV camera housing).
Fixing the strips in position;
Screw Fixing: the base of each strip features multiple fixing holes to allow them to be screw fixed in position where appropriate.
Adhesive Fixing: as an alternative to screw fixing, our special external SILIRUB 2/S (with built in fungacide) instant silicon adhesive, can be used to bond the
pigeon spike strips to window sills, ledges, wall toppings, etc. One tube
of Silirub will be sufficient to fix 24 pigeon or gull strips in
position).
Window Clips: our special window clips provide a simple way to fix
pigeon spike strips to opening windows, where fixing the strips to the window sill would foul the operation of the window.
Gutter Clips: provide a practical way to attach bird ban bird spikes to rain guttering, etc ,around roofs. The clips simply clip to the edge of the guttering to fix the strips securely in place, but allow easy removal (simply unclip) of the bird spikes to allow access to the guttering for cleaning / debris clearing, etc
Cable Ties: offer a simple solution to attaching anti roosting strips to pipe-work, CCTV cameras or light housings, etc.
|
|
What do our
customers say? |
 |
|
"...thank
you so much for my pigeon spikes, they arrived the day after I
ordered them and the extra seven strips I had under-ordered, were
delivered the following day. The spikes were so easy to put up, that
I did it while my husband was at work. As you can see from these
photos, they look good and have been an instant
success - the pigeons have gone! …a great product and great
service …I will definitely be recommending you to my
friends and family…" -
Mrs Austin - Essex |
|
|
|
|
|
Defender pigeon deterrent
spikes are manufactured from clear, UV stabilised polycarbonate material, are quick and simple to install (bond-on, screw-on or clip-on fixing options), easily affordable, and provide a practical yet harmless way to prevent pigeons from congregating or nesting on ledges, window sills, in roof gutters, on CCTV camera or lighting housings, etc.
|
|
|
| Protecting
Rain Guttering: |
|
|
|
|
|
| Rain guttering around roofs are a
favoured pigeon resting place as they offer protection against
the wind, etc. Pigeons can however cause a build up of waste
materials in guttering which can lead to blockages, leaks,
etc. and cause damage to your building.
The special gutter clips simply clip on to
the base of the pigeon spikes and then clip over the edge of
the guttering. They also allow simple removal of the spikes
(no tools required) for gutter clearing, etc.
|
|
| Protecting
Window Sills: |
|
|
|
|
|
Window sills provide another
frequent resting place for pigeons, but again a simple row (or
multiple rows - for wider windowsills, ledges, parapets, etc.)
of pigeon spikes, which can be stuck or screwed to the
windowsill provide an effective deterrent
|
|
| Protecting
Windows: |
|
|
|
Window clips provide a simple way
to attach pigeon spikes and seagull spikes to opening windows.
Obviously, if pigeon spikes were attached directly to the
'window sill' in this situation, it would prevent the window from
being opened.
|
|
| Protecting
Drainage Pipes / Camera Housings, etc: |
|
|
|
| Cable-ties offer a
simple solution to attaching pigeon spikes to
vulnerable drainage pipes, CCTV camera housings, etc. These special nylon
pull-tite cable ties are available in a choice of black or
natural.
|
|
|
|
|
|
|
|
|
|
|
Home
