Insight Anti-Climb Downpipe Covers are galvanised pipe protectors which not only protect vulnerable pipework from vandalism and accidental damage, but are also designed to stop anyone from using the protected pipe as a climbing route that will give them access to a flat roof or an upper storey window.

These practical and inexpensive pipe covers, are popular in high security environments such as prisons, police stations and mental health units, as well as being widely used at retail premises and by commercial organisations such as banks and shops. Local authorities, housing associations, schools and hospitals also like to protect their vulnerable pipework using these effective pipe covers.

Homeowners are also using these covers to protect their properties and enhance the external appearances of their houses.

These super-strong pipe covers are manufactured from folded and formed galvanised steel sheet, which is significantly stonger than alluminium. They provide a highly robust, weatherproof cover that makes climbing your pipework virtually impossible.

Insight Securty stock pipe covers are available with a silver coloured galvanised finish, or overpainted with an attractive, easy clean and very durable, baked on black powder coat paint finish (other colours available to special order).

Anti-Climb Downpipe Cover Dimensions

Height: 2 metres x Depth: 15cm x Width: 15cm excluding (the fixing flanges)

(approx. Imperial dimensions: Height: 6` 6" x Depth: 6" x Width: 6")

Note - These covers are designed to fit comfortably over most modern downpipes and drainpipes, however may not be suitable for use with oversize downpipes such as older cast iron types with their bulky fixing brackets, etc.

Need a special size or colour?- no problem, we can bespoke manufacture any size or colour to order, please call to discuss your requirements.

How to Install Down-Pipe Covers

These pipe covers are quick and easy to install. Each cover features a full length flange to either side. Each flange is pre-punched with 6 fixing holes enabling them to be snuggly bolted directly to the wall either side of the down-pipe.

Because the covers will normally be fixed to a brickwork or masonry surface, each cover is supplied as standard with 12 fast-fix masonry bolts.

Note - a 6mm masonry drill bit (not included) will be required when using the fast-fix masonry bolts to install the covers.