BigBoy3 Motorcycle Ground Anchor Sold Secure Diamond

The Mark2 BigBoy telescopic ground anchor, was a tough act to follow, but at Insight Security we never rest on our laurels, and as a result of our continuous drive to develop the best motorcycle ground anchor, our new telescopic Big Boy3 concrete-in high security ground anchor, has achieved the coveted SOLD SECURE POWERED CYCLE DIAMOND rating (previously known as Sold Secure Motorcycle Diamond rating), making it a true leader in the field.

The BigBoy3 has retained all the benefits of its predecessor, however we have increased the internal size of the Secure Chain Guide, to accommodate high security chains up to and including the 19mm sleeved chains produced by all chain manufacturers.

Designed for security and convenience it will now easily accommodate larger “Sold Secure Powered Cycle Gold” security chains such as our 16mm & 19mm Squire or Protector Chains, to provide an ultra-tough, heavy duty ground anchor lock point for Motorbikes and other valuable equipment.

Super-Strong Heavy Duty Ground Anchor - Not a Trip Hazard

The BigBoy Telescopic Ground Anchor is designed so that when installed, the top plate is flush with the surrounding ground surface so that it does not present a trip hazard and can be safely driven over. It is a heavy-duty ground anchor specifically designed to work with heavy duty security chains, as are typically used to secure valuable motorcycles and other equipment.

Simple and Practical to Use

To use it, simply grab the finger lift handle and pull the concealed telescopic section upward. Then slip your security chain through the 80mm diameter chain guide, which will take up to 19mm sleeved security chains with ease.

High Viz reflector pads are fitted to the outer walls of the telescopic inner tube, to protect against accidental collision with the anchor while it is in use during the hours of darkness.

Use With Our Sold Secure Powered Cycle Gold Rated Chains

Designed to deliver ultra-tough security whilst being easy and convenient to use, the BigBoy heavy duty ground anchor is the only concrete-in, flush fit telescopic unit to accommodate Sold Secure Powered Cycle (Motorcycle) Gold chains up to 19mm. Note; competitor units which feature a chain guide of 50mm or 60mm will only accommodate chains up to 10mm or 11mm respectively, which cannot meet the Sold Secure Powered Cycle Gold standard.  

Attack Resistant Steel and Weatherproof Finish

The BigBoy is manufactured from rugged, thick-walled box section steel (an inner and outer tube) with an 8mm thick top plate which accommodates the finger lifting handle.

Weighing in at a chunky 10.5kg, the BigBoy is built for security and manufactured to last.

During the BigBoy manufacture, a protective, corrosion resistant galvanised coating, is applied prior to the application of the final tough, baked on, black powder coat paint finish.

A rugged 16mm Stainless Steel Bolt prevents the telescopic inner section of the ground anchor from being removed once the unit is installed and also acts as a second anchor bar within the concrete, supplementing the anchor plate at the base of the unit.

The telescopic section is fitted with a square tubular steel chain guide and is protected against cutting and grinding attack, by heavy duty construction, including a solid steel 8mm thick top plate, thick steel walls and special internal anti-grinder protection.  

How to install the Big Boy Ground Anchor.

The BigBoy heavy duty ground anchor is designed to be installed so that the top plate is flush with the surrounding ground surface, to prevent it being a trip hazard.

Installation is a simple three step process:

1.    Excavate a hole 300mm deep (and 200x200 wide as a minimum).

2.    Create a gravel bed at the bottom of the hole to aid drainage.

3.    Position the anchor on the gravel bed, so that the top plate is level with the surrounding ground surface and pour in a good 3-2-1 concrete mix to secure it in place (the flat anchor plate at the base of the unit provides stability of the anchor as the concrete is poured in around it). 

Important: Allow the concrete to fully cure before you start using your ground anchor.

Where to locate your Big Boy Ground Anchor.

Unlike Bolt-Down type Ground Anchors, BigBoy is ideal for installation into asphalt surfaces, paved or tiled areas, concrete paved block driveways, and unmade ground among others.

It also offers a practical alternative to embedded Y-tube style ground anchors, which can collect water, leaves and other debris making them potentially messy to use, as well as presenting a risk of smaller feet or even animals from falling into them.

The Best Motorcycle Ground Anchor for Serious Bikers.

The BigBoy is the ultimate choice for anyone looking for a serious ground anchor that offers a high level of security coupled with convenience and easy usability, which are essential features for any heavy duty motorcycle ground anchor.

The heavy-duty materials used in manufacture and the weather protected finish will provide years of practical service, protecting your valuable bikes or other equipment, making this a really great investment

Dimensions & Weight:

Overall Height           274mm (assembled unit ready to install)
Overall Width            200 x 200mm
Chain Aperture         80mm

Weight                       10.5kg

See all “High Security Chains”

See all “Security Ground Anchor” products