Need Help or Advice?
Call the Insight team
01273 475 500
Product code: TM FXASPHALT6
There are no reviews yet
Be the first to write a review
this heavy duty steel and rubber expansion fixing pack is ideal for bolting traffic flow plates to an asphalt surface, also suitable for fixing parking posts
1 - 5£15.50 ex VAT
6 - 20£15.00 ex VAT
21 + Call us on 01273 475500
No Quibble Money Back Guarantee
when you buy on-line here, you`re automatically covered by Insight`s
"No Quibble - Money Back Guarantee"
These heavy duty steel bolt and rubber ram nut expansion fixings are M12 x 100mm fixings to guarantee a robust fixing for products such as traffic flow plates (car model) to an asphalt surface
Pack of 6 fixings
The fixing requires a 24mm diameter hole drilled into the asphalt surface to a depth of 100mm, for the rubber sleeve.
Note;
Asphalt surfaces can vary significantly in terms of structural integrity as a result of age, wear, adverse weather conditions, etc.
It is therefore advisable when using this type of rubber nut fixing, to install them with a suitable resin to enhance the mechanical fixing itself. The resin must be a Vinylester , Styrene free Resin ( cheaper polyester does NOT work).
This type of resin comes as a two part (in same tube) 410ml tube and will require a special large diameter gun for application.
The mixer nozzles supplied are used with these Resin tubes to mix the chemicals whilst injecting, but once used must be discarded as they cannot be cleaned for reuse.
Need Help or Advice?
Call the Insight team
01273 475 500