Garage Door Defender with shackless padlock - Sold Secure Bronze (domestic)

PJB Garage Defender is a SOLD SECURE BRONZE APPROVED PRODUCT designed to protect your up-and-over garage door.

This clever door blocker is simple to fit and easy to use - when locked in position, it simply prevents the bottom of your garage door from swinging outward, therefore stopping the door from opening.

By popular demand, this product is now available with a durable, hard baked on, Black or White paint finish

• As featured in “ Motorcycle News” – 3rd Dec 2014- “ Don’t give bike thieves an easy ride”- fitted and featured by Bruce Dunn- MCN Road Tester
• Solid Steel Shackleless Padlock Included with two keys supplied
• Defender Unit Locks onto a Solid Steel Base With Padlock to block the tilt action of door
• Simple Ground Fitting In Front Of Garage Door With two Expandable Security Raw bolts included
• Concrete application- we reccommend 4-5 inches of good solid concrete outside the closed garage door for this application
• Choice of Black or White Powder Coated Paint Finish
• Heavy duty steel construction
• Easy To Fit - Full Fitting Instructions Included
  (simply mark out the position of the base plate, drill the two fixing holes - and fix down with the supplied security bolts)
• Every Garage should have one
• Made in Britain.
  
  Features & Benefits of the Circular Shackleless Padlock
• Solid Steel Round Lock Body
• Protected Shackle
• Diameter = 73mm
• Five Pin Removable Lock Barrel
• High Security Product eliminates cutting and sawing Risks
• Maximum Pick and Pry Resistance.

Note - For installation into a tarmac surface or block pavers, an alternative concrete-in Base Plate (at no extra cost) may be preferable - please "select this Option" at time of order if required;

Product Ref: TM GARDEFCIP - Garage Defender Concrete-in Hardened Steel Base Plate

This unit is required when the application site does not have sufficient good concrete outside of the closed garage door  i.e. – where tarmac or block pavers are present

We recommend that you need at least 4-5 inches of good concrete to fix the standard bolt down Base Plate to. If this is not available, we recommend the use of the alternative "Concrete-in Baseplate" as shown here.

To install this hardened steel unit, simply excavate a 250mm deep hole and fill with a good 3-2-1 concrete mix

Note -This unit can be supplied as a FREE alternative to the Standard Base Plate when requested at the time of order of your Garage defender (see product option boxes above) - or can be supplied as a chargeable item if ordered subsequently