Need Help or Advice?
Call the Insight team
01273 475 500
Instant Spiked Anti Climb Collars for CCTV camera poles, etc - for poles from 155mm to 300mm diameter
Product code: PS RZCOLRL
There are no reviews yet
Be the first to write a review
These practical Anti Climb Collars offer an easy and instant way to stop people climbing your CCTV Camera poles, lamp posts, etc.
Warning - Installation Height Restrictions may apply:
- it is strongly recommended that anti-climb spikes should wherever possible be installed at a minimum height of 2.2 metres from the ground (a higher minimum height restriction may apply for certain locations or where children may be present).
Display of Warning SIgns
- It is also strongly recommended (and may be a legal requirement) that wherever Anti Climb Spikes are installed, "Warning Signs " should be displayed
Quantity
Price
1 - 10£54.95 ex VAT
11 + Call us on 01273 475500
No Quibble Money Back Guarantee
when you buy on-line here, you`re automatically covered by Insight`s
"No Quibble - Money Back Guarantee"
Click to enlarge image
 |  |
SKU Number - PSB01080 Our practical Spiked Anti Climb Collars / Anti Climb Brackets are fabricated from our robust Razor Point anti-climb barrier and offer an instant, low cost solution to protecting your CCTV camera mounting poles, street lamps, etc. against thieves, vandals, and other would be climbers.
The dual rows of straight and barbed spikes offer an effective physical and also a very visual barrier to climbers.
For extra protection, two collars can be installed (one above the other) as shown in the lower picture opposite,
Size-A; for pole diameters; 75-150mm (3.0" to 6.0")
Size-B; for pole diameters; 155-300mm (6.0" to 12.0")
...More Options: see full anti climb bracket / collar range
for non standard and larger sizes, please call us - tel: 01273 475500
...and for maximum protection, a metre of the pole immediately above and/or below the collar can be painted with anti climb paint (see Anti Climb Paint)
Warning - Installation Height Restrictions may apply:
- it is strongly recommended that anti-climb spiked collars should wherever possible be installed at a minimum height of 2.4 metres (8 feet) from the ground. In any event the units must be installed so that they present no danger or accidental risk of contact to passers by.
Display of Warning Signs:
- It is also strongly recommended (and may be a legal requirement) that wherever Anti Climb Spikes are installed, "Warning Signs " should be displayed -
Unboxing a new purchase can be a chore, but to minimise our impact on the environment, Insight Security supply goods packed with the minimum amount of recyclable packaging needed to ensure your products arrive safely and ready for you to unpack.
Here’s what`s inside the product pack
Pack Content
2x preformed Razorpoint sections with attached rubber bumpers
2x M8/85 Bolts
2x M8/30 Bolts
4x M8 Anti-Tamper Shear Nuts
