M10x100 Hexagon Head Anchor Screw Bolt Zinc Plated - Pack of 10

Ideal for fixing into a wide range of substrates including; concrete, brick, masonry and wood, as these self tapping bolts are a non expansion type, they can be used closer to the edge of the material than expansion fixings and can also be used on more fragile materials such as marble or natural stone.

These M10 x 100mm heavy duty bolts are ideal for fixing equipment and other items to a sound concrete base, but they are also widely used wherever a quick and easy installation is required, saving on installation time and therefore installation costs.

When using the M10 Bolt, you will need to drill a 10mm diameter hole into the substrate and there will need to be a 12mm diameter clearance hole in the item to be fixed in position.

Installation (see the Installation Guide supplied with the bolts)

Installation is quick and easy, simply drill the hole, clean the dust and debris out of it, feed the bolt through the item to be fixed and screw the bolt into the drill hole - job done!

When drilling the hole, remember that it is important to overdrill it to allow for drill dust, etc - see the installation guide for full details

Note: these bolts cut their own thread into the substrate, so can if required be removed and reinserted at a future time should the need arise.