Robustly manufactured from galvanised steel, our "U" profile Razor Channel is designed to fix to the top of walls, fences or gates to form an anti climb barrier to deter would be intruders.

The base of the channel is pre drilled at intervals with fixing holes, however, where appropriate and preferred, it can as an alternative be welded into position. For maximum effect, the jagged double top edge is staggered, with the rear row of spikes being higher than the front row.

Manufactured from sheet steel, this product is galvanised to protect against weather and can as an optional extra be supplied overpainted with a robust baked on powder coat paint in any standard RAL colour.

Dimensions:

Length: 1.8 metres
Height: front 30mm / rear 50mm
Width: overall 60mm / base 40mm

Warning - Installation Height Restrictions may apply:

- it is strongly recommended that anti-climb spikes should wherever possible be installed at a minimum height of 2.2 metres from the ground (a higher minimum height restriction may apply for certain locations or where children may be present).

Display of Warning Signs

- It is also strongly recommended (and may be a legal requirement) that wherever Anti Climb Spikes are installed, "Warning Signs " should be displayed -

Need advice on the suitability or use of this product? - call us on tel: 01273 475500

Files Related to this product