RotaSpike - bracket - Flat End Type (for Palisade / Alleyway)

The Flat End Bracket is used to terminate a run of Rotaspike.

An end bracket must be installed at each end of a straight run of Rotaspike to protect the integrity of the system.

Interim support brackets should be installed along the length of the barrier at recommended intervals of no more than 2 metres.

Warning: Due to the aggressive nature of this product, it is strongly recommended that to avoid accidental contact to passers by, this product is installed at a minimum of 2.4 metres from ground level.

Warning Signage should be clearly and prominently displayed at the installation site to ensure that anyone approaching the barrier is aware of its existence - it is recommended that warning signs should be displayed at a maximum of 5 metre intervals.

Usage

The Flat bracket is primarily designed for side fixing to palisade fence posts, alleyway wals or other structure, and when secured in place, it prevents the unauthorised removal of the Rotaspike Vanes and any other form of tampering with the system.

Manufacture

Manufactured from welded steel tube and sheet, and galvanised to protect against the weather, the top of the bracket is pointed to form additional anti-climb protection.

Specification

see all Anti-Climb Products from Insight Security