RotaSpike - bracket - Flat Interim Type

The Flat Interim Bracket is used to support a run of Rotaspike at intervals along the length of the barrier.

Note: an end bracket must be installed at each end of a straight run of Rotaspike to protect the integrity of the system. It is recommended that the barrier should be supported with Interim Brackets at intervals of no more than 2 metres along its length.

Warning: Due to the aggressive nature of this product, it is strongly recommended that to avoid accidental contact to passers by, this product is installed at a minimum of 2.4 metres from ground level.

Warning Signage should be clearly and prominently displayed at the installation site to ensure that anyone approaching the barrier is aware of its existence - it is recommended that warning signs should be displayed at a maximum of 5 metre intervals.

Usage

The Flat bracket is primarily designed for side fixing and is popular for mounting Rotaspike above palisade fencing, and other structures. These brackets support the weight of the Rotaspike Barrier when  installed at intervals along its length.

Manufacture

Manufactured from steel sheet and galvanised to protect against the weather, the top of the bracket is pointed to form additional anti-climb protection.

Specification

see all Anti-Climb Products from Insight Security