Need Help or Advice?
Call the Insight team
01273 475 500
Physical security restraints are a great way to protect many types of item against theft, but security marking your valuables delivers a low cost extra level of protection which is strongly recommended,
...and in some cases security marking is the only practical way of protecting an item.
Have you ever thought just how easy it would be for a thief to steal your; I-pad, Motorcycle, Ride on Garden Mower, Mountain Bike, Jet Ski, or any of the other cherished posesions you own?
...but amazingly, the smart people who take protection into their own hands, often find that they avoid becoming victims - after all what daft thief is going to risk getting caught, when there are so many easy pickings on offer?
Security marking valuable items will discourage burglars from stealing them by making it difficult to sell them on and it will also help the police to ensure your valuables are returned to you if they are stolen but subsequently found.
For home security marking, mark your property with your postcode and the number and/or name of your house, ...unles of course you are using a proprietary marking system such as a DNA or Microdot type security marking system which provides a unique security code for you.
Remember, while your posesions may mean a lot to you, to the thief, they are just another way of making quick and easy cash.
We have previously covered using equipment alarms, and various types of physical measures to protect your valuables, such as locking items up or locking them down, but there are other things that you can do which can also act as an effective deterrent to thieves.
Security marking is a simple, low cost and highly recommended addition to your practical physical measures, and the good news is, it won’t break the bank.
In fact security marking your valuables is strongly recommended throughout the UK by Security Specialists, Police, and Insurers, all of whom recognise and understand the benefits of doing so.
There are basically two types of security marking available, "Visible Markings" and "Covert (Hidden) Markings", with the best systems often combining both types of mark for maximum effectivenes.
There are many forms of aset marking systems and products available including; aset labels, engraving, chemical etching, UV (Ultra Violet) marking, DNA marking and microdot marking among others. So let’s look at each in a little more detail.
Aset Labels are a great way of identifying and recording details of the aset to which they are attached.
Although virtually all labels can be removed, some such as Ultra-destruct fragmenting labels will take time to remove, while the removal of any type of label could cause damage to (and therefore reduce the resale value of) the item to which they are attached.
As a component of a security marking system therefore, the main function of a visible label is to warn thieves that other measures such as various types of stealth marking are or may be also employed
...which will tend to encourage thieves to seek out an easier target, as no criminal wants to get caught with an item where the genuine owner can be easily identified by the police.
This type of low cost marking system consists of a marking compound (normally in the form of a paste or fluid), which is applied to the receiving surface through a customised stencil.
Once the compound has been applied, the stencil is left in position until the marking has etched itself into the surface of the item, after which the stencil is removed.
The visible mark is therefore chemically etched permanently into the surface, although such marks are normally only very much surface markings which can be easily abraded away, albeit leaving evidence of the abrasion where the mark had been.
This type of mark is particularly popular with schools and other establishments operating on very tight budgets and with many items to mark, such as computers and office equipment, etc.
Chemical Etching can be a relatively mesy product to use, but price often over-rides aesthetics and any installation inconvenience. The most popular packs are designed to mark plastics (and polymer painted surfaces such as computer casings), however specialist compounds are also available for marking certain other materials such as aluminium or glas.
Anyone who has ever tried their hand at Freehand Engraving, will probably have come to the conclusion that the end result was not a pretty sight!
Engraving is a very specialist form of marking, which is best left to a profesional engraver and is therefore relatively costly. This type of marking is ideal for presentation trophies, etc, but is les appropriate for security marking in view of the relatively high cost per unit.
Die Punched Marks;
Once popular, Die Punched marks are still used in some industries,
...but new technologies are taking over, especially when it comes to the security marking of items.
Historically die-punch marking was a popular way to security mark bicycle frames, however the introduction of new frame materials such as carbon fibre, meant it could no longer be used as the impact could shatter the frame!
...and in any event, who would want a crude die-punched mark on a smart new bicycle, especially one costing upwards of £1,000?
UV (Ultra Violet) Marking;
This type of marking is sometimes called stealth marking, as the marks are generally invisible to the human eye, but fluoresce and become instantly visible when a UV light is shone on them, as shown here with a Datatag UV mark.
Sometimes these marks are applied by brushing a UV fluid over a customised stencil, while other UV marks are simply handwritten with a low cost UV pen.
The resilience of UV marking is dependent on the quality and formulation of the UV "ink" used. While many are now water resistant once applied and will not wash off easily, some may need replacing periodically (it’s a good idea to check the mark annually), as UV marks can fade when exposed to bright light.
When using UV marking therefore, it is often best to place the mark on the item in the place least exposed to bright light, i.e. for antique vases or ornaments, the best place would normally be on the underside of the base, for pictures, mark on the back, etc.
To enable you to check your UV marks periodically, you may want to invest in a low cost UV torch or lamp.
Scientific advancements over recent years has made it financially viable to use hi-tech chemically unique (generally referred to as DNA marking) formulations as a form of property security marking.
Some such systems allow a small batch of a single formulation to be shared among a number of users, relying on the isue to users in different geographic locations or users in different industries or busineses to allow the registered owner of the marked product to be identified.
More sophisticated systems such as the security marking packs produced by Datatag feature a "Pack Unique DNA", so there can be no doubt who the registered owner of the marked item is.
Microdot Security Marking;
Microdot technology has been around for many years now, but many suppliers have come and gone as they have not made sufficient investment in; marketing their product, providing backup systems such as a secure database of registered owners, or providing adequate numbers of free readers to the Police.
Microdots such as the Datadot product from the Datatag system range, are les than 1mm in diameter, yet bear a unique identification code (which is registered to the owner of the marked item) along with the System Providers contact details, so the police will quickly and easily be able to get the details of the registered owner by reading the dot then checking with the Datatag Secure Database.
The microdots are typically supplied in a small bottle and are suspended in a liquid adhesive. They are simply painted onto the surfaces to be marked where they bond permanently in place.
There are generally around 1,000 dots in each bottle, so there are plenty enough to mark many items, and it only requires thieves to mis just one dot when trying to clear all marks from a stolen item, to face arrest and prosecution for illegal posesion of stolen goods!
The Datatag Datadot system is well established and the Polices are well equipped with appropriate readers to be able to read the contents of the tiny microdots
These clever devices are basically tiny electronic circuits embedded in a protective housing or printed onto a special surface. Each unit is programmed with a unique identification code which cannot be deleted or changed in any way.
These products can vary in size according to type and application, and range from tiny glas transponders roughly the size of a grain of rice, to button shaped units about the size of a small painkiller tablet.
For some applications the transponder can even take the form of a larger flat disc, as it does for those placed under floor carpets in vehicles, however, transponders could be manufactured in almost any shape or size required for a specific application.
Transponders require no power supply and are "fit and forget" products. They are activated when a matching scanner unit pases close to the transponder, at which time the scanner wakes up the transponder and reads and displays the unique identification code.
more about: Security Marking Products
or call the Insight Experts, we’re here to help you find the right solution - tel: 01273 475500
Security Marking (Print Friendly Version)
This message was added on Friday 27th November 2015
Need Help or Advice?
Call the Insight team
01273 475 500