Tab Connector Sensor Cable (in 1 metre loop) - with Tab

 
1 metre Tab attachment cable for use with our range of Loop Alarm Controllers - phono to phono (male to female) connectors.
 
Suitable for use with either the battery or Mains Powered Loop Alarm Controllers. Multiple cables can be plugged together to form a security alarm loop of up to 50 metres in length

The tab connection cable connects into the alarm loop in the same way as the other loop alarm cables. The flexible plastic tab (15 x 45mm adhesive surface) features a sticky underside into which the electrical circuit is integrated (see picture of the underside of the tab above).

In use, simply peel off the protective paper covering the adhesive surface and stick the tab onto the item to be protected. The flexibility of the tab means that it can be used on curved or contoured surfaces that flat based sensor cables such as the Limpet attachment would not be suitable for. Once fixed in place and connected to the alarm loop, switch on the alarm controller and the new item is now protected along with all other items connected to the loop.

If anyone tries to disconnect the cable from the loop while the system is armed, the alarm will sound. If the tab is peeled off of the protected item, the alarm will sound, as the part of the printed alarm circuit integrated into the adhesive will be left behind, instantly breaking the alarm circuit.

If the alarm siren is triggered in the event of the loop circuit being broken, etc. it can be silenced and reset via the arm / disarm key switch.