TORC Sold Secure Motorcycle Gold Ground Anchor

The popular Pragmasis Torc Ground Anchor has been the best rated ground anchor on the market for many years, having achieved Sold Secure Gold rating in so many categories including motorcycle and ATVs.

Sold Secure Accreditation.

The new third generation Torc Maxi and Torc Mega Ground Anchors have been developed specifically to confront the ever-growing threat of motorcycle theft and have achieved the Sold Secure Gold rating for all categories (The Mega Unit has even achieved Sold Secure Diamond rating when installed with a resin fixing kit).

The Pragmasis Torc Maxi Ground Anchor will accommodate chains up to 19mm, while the Pragmasis Torc Mega will easily accommodate the latest 22mm Super High Security Chains and can even secure multiple chains at once.

Both the Mega and Maxi units feature a massive and uncroppable 22mm diameter, forged hardened steel shackle, that would have to be cut twice to defeat it. They also feature special hammer-in hardened steel plugs to protect the fixing bolts, so there is no risk of the bolts being removed or tampered with after installation.

Torc Ground Anchors are UK Police approved under the Secured by Design scheme and provide a safe anchor point for your high security Protector Security Chains.

When used with the resin fixing pack, the Torc Mega has even achieved Sold Secure Diamond accreditation for Motor Cycles and Caravans.

Which Torc Anchor do you need?

The main difference between the Maxi and slightly larger Mega units is Chain Capacity, which based on our high security Protector Chains is shown below.

The larger Torc Mega will easily accommodate chains up to 22mm, or multiple chains such as

• 1 Protector 25mm chain
• Protector 22mm plus Protector 19mm (tight but OK).
• Protector 22mm plus Protector 16mm plus Protector 13mm (OK).
• 2 Protector 19mm chains (easy).
• 2 Protector 19mm chains plus a 16mm (tight but OK).
• 2 Protector 19mm chains plus a 13mm (easy).
• 3 Protector 16mm chains plus a 13mm chain (easy).

The slightly smaller Torc Maxi will accommodate single chains up to 22mm, or multiple chains such as

• Protector 19mm plus Protector 13mm (OK).
• 2 Protector 16mm chains (tight fit).
• 3 Protector 13mm chains (OK).
• 4 Protector 11mm chains (OK).

Quick and easy to install, the Torc anchor folds flat when not in use and provides the ideal safe anchor point for use with your high security chain and padlock, providing powerful protection against theft for your motorcycle, ATV and other valuables.

Choose your Torc Anchor with the Fixing Kit that is right for your application.

The Torc Mega and Maxi models are each available with a choice of fixing kits to ensure there is one suitable for wherever you want to install the anchor.

Simply choose the Torc Anchor with the required fixing pack you need when you add your Torc Anchor to your shopping basket.

Torc Ground Anchor with Brick & Concrete (General Purpose) Fixing Kit.

This general purpose fixing kit is ideal for fixing the anchor into medium to good quality concrete floors or to sound brick walls. The kit includes high quality security expansion bolts, driver bit, drill bit and dust blower tube.

Torc Ground Anchor with Concrete Floor Fixing Kit (Resin Fixing Pack).

This fixing kit is ideal for fixing the anchor into high quality concrete floors, or into any substrate where the use of an expansion bolt could possibly cause structural damage.. This Resin Fixing Kit, includes extra long security bolts and resin capsules, driver bit, drill bit and dust blower tube.

Torc Anchor with Van and Bike Safe Fixing Kit.

The Torc anchor van fitting kit is designed for easy installation in a van or other thin-walled metal enclosure, including bike safes. The kit includes high tensile M10 x 40 countersunk bolts, load spreading washers and security shear nuts.

Ground Anchor Weight & Dimensions.

Torc Maxi Dimensions

• Shackle: 22mm Diameter
• Maximum Horizontal Clearance Within Shackle: 95mm 
• Base Plate: 139mm x 90mm overall 
• Fitting Area: 220mm x 139mm
• Height to top of bridge (highest point, when folded): 38mm
• Weight: 4kg

Torc Mega Dimensions

• Shackle: 22mm Diameter
• Maximum Horizontal Clearance Within Shackle: 105mm
• Base Plate: 158mm x 100mm overall 
• Fitting Area: 256mm x 149mm
• Height to top of bridge (highest point, when folded): 35mm
• Weight - 4kg 

Weather Protection.

A two-stage corrosion protection with a zinc phosphate pre-treatment and tough powder coating finish, helps to ensure a long and trouble free operational life.

Made in Britain, these high quality Ground Anchors are available from stock and are designed to offer years of protection and peace of mind.

Note: this high security unit is designed to be a permanent fixture, so please make sure you install it in a suitable location. Please also note that bolt down ground anchors are not suitable for fixing into paving slabs or block paving (a concrete in type anchor could offer a practical alternative for these surfaces).

See all ground anchor products.

See all High Security Chains.

See all High Security Padlocks.